Saturday, April 24, 2010

Preparing for the final draft and hardcover report

Preparing the final draft that include all 5 chapter from the beginning. After get the approval from the supervisor, the hardcover will be made. The hardcover must do 2 copies. One for the FYP committee and the other one is for my self. For my supervisor, he only want a softcopy. So I need to burn it to the cd using pdf format.
Posted by at

13 comments:

  1. AfifAMay 27, 2010 at 6:07 PM

    Salaam

    Our FYP was very similar to yours
    "Wireless Automatic Meter Reading System for Household Electric Meters" using ZigBee and GSM

    We finished our presentation and submitted the report last week.

    If you need any help I can help you by the end of next week
    "after finishing my final exams =) "

    Nice work .. May Allah grant you success and good will in all your work.

    Afifa

    ReplyDelete
  2. nobodyJune 7, 2010 at 11:44 PM

    salam...

    rite now, i doing my final year project...
    im also need to use zigbee..
    but, the problem here..
    i still dun know how to connect the zigbee..
    to interface with xctu software..
    plz help me and guide me..
    your helping is really appreciate.
    if u dun mind..
    may u upload the circuit about zigbee connection?

    ReplyDelete
  3. farzanaJune 11, 2010 at 9:45 PM

    first thing, i need to know what type xbee that u used.. is it same with the one that i used?

    ReplyDelete
  4. Erivaldo JuniorOctober 16, 2010 at 2:04 AM

    Hi... I'm from Brazil and I'm working with Home Automation and ZigBee network. Could you give me any help? I want simulate a circuit with PIC 16F876A and XBee in my compute, but i don't know how.

    ReplyDelete
  5. farzanaFebruary 16, 2011 at 5:15 PM

    sorry Erivaldo,

    but i think i clearly describe it in my post under "communicate between two SKXBee" title..

    ReplyDelete
  6. Erivaldo JuniorFebruary 23, 2011 at 8:56 PM

    Hi Farzana,

    Did you configure the "radios" with X-CTU and did you transmit the datas from TX of the microcontrollers like a cable comunication?

    ReplyDelete
  7. UnknownMarch 6, 2011 at 12:30 AM

    hiii

    I'm doing my project in home automation using zigbee also ^_^


    would u mind sending me ur report to have it as reference ??
    I swear that it gonna be used as reference not else and u can make the file protected

    as its rare to find people work with home automation and zigbee in the same time

    and we have to help from the instructors and supervisor :(

    or can u give me ur email at least to help us with the project :(

    thank you and hope to hear from u soon

    ReplyDelete
  8. farzanaMarch 7, 2011 at 5:54 PM

    Erivaldo Junior: X-CTU is just a software to interface between microcontroller and XBee.
    yup, transmit the data. but wireless..

    amahin: report? hehe no prob.. my email.. fanazra@yahoo.com

    ReplyDelete
  9. Erivaldo JuniorMarch 8, 2011 at 12:08 PM

    Thank you very much, Farzana! :D

    Farzana, I´ll send you an e-mail soon, because my project has changed in many things. :P

    Amahin, my e-mail is "fcoerivaldojr@yahoo.com". My supervisor doesn´t help in nothing. That this is difficult. :-(

    ReplyDelete
  10. farzanaApril 25, 2011 at 10:11 AM

    i think no one email yet right? coz i not receive any email from both of u..

    ReplyDelete
  11. blogMay 28, 2011 at 4:06 PM

    Hello farzana . I'm Plabon From Bangladesh. I'm also interested in Zigbee. If you don't mind Can you give circuit diagram and report?? My mail address is plabon637@yahoo.com.

    ReplyDelete
  12. FagunJune 29, 2011 at 2:12 AM

    hi!! I m interested in this project!! & i starts on working it!! can u pls send this all details of this projece on my mail?? my mail id is fagun.pathak@gmail.com

    ReplyDelete
  13. FagunJuly 12, 2011 at 1:57 AM

    Pls reply me as soon as possible!!!!!!!!!!!!!

    ReplyDelete

Subscribe to: Post Comments (Atom)