WinPic 800

WinPic 800 is one of software needed to burn the program from the computer to the IC. You can get the WinPic 800 from this address http://www.cytron.com/. Download the WinPic 800 zip file from the internet then click at the file.

If your WinPic 800 is in the other language, click to the Idiama' that is placed on top of the WinPic 800 then select English.

At the right top of WinPic 800, select the PIC that you use for your program such as PIC 16f877A. PIC16F877a is in PIC16F category, so select PIC 16F then, at the bottom of that, select the PIC16F877A.

Then change the setting of the hardware and software that suitable to the IC that been used.

To burn the program, go to file> open. Then search the program location that you been saved. then click open. Then the WinPic will read your program. Then click program all that in the red circle in the figure below. Then the program will recognize your PIC and burn the program into the PIC.